Frameless glass, large-format tile, and Schluter Kerdi waterproofing behind every wall. Designed and installed by a dedicated in-house crew from start to finish.
Family-owned since 2004. Fixed pricing, 2-year workmanship warranty, WSIB registered.
A walk-in shower opens up the room. The glass replaces a heavy curtain or frosted enclosure, the tile choices are wide open, and the layout works in everything from a compact ensuite to a large primary bath.
For most Mississauga homeowners, a walk-in shower is the single change that makes a 1990s or 2000s bathroom feel current. The shower becomes the focal point of the room, and the rest of the bathroom can be refreshed around it.
We build walk-in showers with a low tile curb or threshold, framed or frameless glass, and a fully waterproofed substrate. The shape, glass configuration, and tile are chosen around your space and how you actually use the bathroom.
Most projects fall into one of these four shapes. The right one depends on the size of your bathroom, where the plumbing sits, and how much glass you want.
Three tiled walls with a single glass panel and pivot or swing door at the front. The most common layout in Mississauga ensuites and works well in tighter footprints.
Two tiled walls with two glass walls meeting at a corner. Opens the room visually and is a strong choice when the shower replaces a corner tub or sits diagonally in a primary bath.
One fixed frameless glass panel, no door, with the shower head positioned so spray stays inside. Clean look, easy to clean, no swing clearance to plan around.
Frameless three-sided enclosure with a fixed panel and a hinged glass door. Used when the shower is freestanding in the room or when you want maximum visibility on the tile work.
The waterproofing system you cannot see is the part that decides whether a shower lasts 5 years or 30. We install Schluter Kerdi on every walk-in shower, full stop.
Our crew is based at 254 The Queensway in Etobicoke, which puts most of Mississauga inside a 25-minute drive. That matters because daily check-ins on an active job are easy, materials get to site quickly, and a tile or glass issue does not turn into a week-long delay.
If your home is in Mississauga, we serve you directly. Common neighbourhoods we work in:
Most walk-in shower projects in Mississauga take 2 to 3 weeks. Here is how the time breaks down.
We measure the existing bathroom, look at the plumbing, and walk through what you want the finished shower to look and feel like.
You get a detailed written quote with the shower configuration, tile spec, glass spec, fixtures, and a single price. The number does not move once you sign.
We remove the old shower, update the framing if needed, and run the plumbing and drain to fit the new layout. Roughly 3 to 5 working days.
Cement board, full Kerdi membrane, pre-sloped pan, then large-format or pattern tile. This is the longest stretch of the job, around a week.
Custom glass is measured after tile is set so the panels fit exactly. Fixtures are mounted, the silicone is run, and the shower is yours.
Every walk-in shower we build is quoted as a single fixed price before work begins. These ranges cover the great majority of Mississauga projects we run, with size, tile selection, and glass spec being the biggest swing factors.
Ranges assume a stand-alone walk-in shower replacement inside an existing bathroom footprint. If the project is part of a full bathroom renovation, the shower is priced as a line item inside the larger fixed-price quote. Numbers above are starting points for Mississauga homes, not promises, your specific quote depends on what we measure on site.
A custom walk-in shower in Mississauga typically starts at $13,000 and ranges to $22,000+ depending on size, glass configuration, tile selection, and fixtures. Our pricing is fixed before work begins, so the number on the contract is the number you pay.
Most walk-in shower projects in Mississauga take 2 to 3 weeks from demolition to final glass install. Tile drying time and the lead time on custom glass are the two biggest factors in the schedule.
No. A walk-in shower can be installed as a stand-alone upgrade in your existing bathroom. We can replace just the shower and refinish the surrounding tile and waterproofing, or fold the shower into a larger renovation if you want broader changes.
We build every shower with the Schluter Kerdi waterproofing system. The membrane sits directly behind the tile and creates a sealed barrier that protects the framing and subfloor. Our crew is trained on the Kerdi system and we use it on every shower we install.
We work across Mississauga, including Lorne Park, Mineola, Port Credit, Clarkson, Erin Mills, Central Erin Mills, Streetsville, Cooksville, Meadowvale, Lisgar, Churchill Meadows, and the Credit Woodlands. Our shop is at 254 The Queensway in Etobicoke, a short drive across the border.
Yes. Our dedicated in-house crew handles demolition, framing, plumbing, waterproofing, and tile. The frameless glass is measured and installed by our trusted glass partner after the tile is set, so the panels fit your shower exactly.
Yes. Our project gallery shows finished bathrooms across Mississauga, Toronto, and Etobicoke, with walk-in showers in a range of sizes and tile styles. Visit bathroomrenos.ca/bathroom-renos-gallery/ for the full set.
Tell us a bit about your bathroom and we will come measure, talk through layouts, and follow up with a fixed-price quote. No pressure, no upsell.
Bathroom Renos Inc. · 254 The Queensway, Etobicoke · 416-220-6423
